DIGITEN Water Flow Control LCD Display+G1"Flow Sensor Meter+G1"Solenoid Valve+12V power

  • $62.99
Shipping calculated at checkout.


This DFC15 controller is used to measure and control the flow of liquid, it can control solenoid valve on/off when the flow reaches to setting value. It is suitable for hall effect flow sensor. Large LCD screen can display the flow rate, volume, and the temperature of the liquid.

FEATURES
Water meter:DFC15 can be used to measure the volume of water
Adjustable accuracy:Calibrate the accuracy through adjust the K parameter
Easy-to-Read Front-Panel Liquid Crystal Display

TECHNICAL SPECIFICATIONS
For DFC15 Controller:
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC; Output: 12VDC, max 2A
Adapter lead length: 1m
Measuring Accuracy: ±1%
Output for Solenoid valve: 12VDC, max 5A
Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L
Quantitative Range: 0-9999.99 G/L
Flow Rate Range: 0-9999.99/LPM(GPM)
Cable Length : 1m
Dimensions: 88mmx126mmx30mm
Weight: 200g
Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85%
For G1" Flow Sensor:
Flow range:1-60L/min
Allow compression:Water pressure 1.75 Mpa below
Cable length:15cm.

For G1" Solenoid Valve:
G1",thread male outer diameter: 32.5mm
Working pressure:0.02-0.8Mpa
Working Voltage:DC12V

Note:
1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.
2, Ensure the solenoid valve and flow sensor direction is the same with water flow.
3, Please use teflon on the thread when requirement, ensure don't leak.
4, The wires can be extended up to 10m.
5, Avoid the water into the controller.

Package includes:
1 x DFC15 controller
1 x G1" flow sensor
1 x G1" solenoid valve
1 x Power adapter
1 x Temperature sensor
1 x Manual

We Also Recommend


Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
a
a.a.
Still in transaite