G2" inch Water Liquid Controller Display Flow Control Meter Quantitative 10-200LPM

  • $67.99
Shipping calculated at checkout.


This DFC15 controller is used to measure and control the flow of liquid, it can control solenoid valve on/off when the flow reaches to setting value. It is suitable for hall effect flow sensor. Large LCD screen can display the flow rate, volume, and the temperature of the liquid.

FEATURES
Water meter: DFC15 can be used to measure the volume of water
Adjustable accuracy: Calibrate the accuracy through adjust the K parameter 
Temperature monitor: Come with temperature sensor, it can measure liquid temperature
Easy-to-Read Front-Panel Liquid Crystal Display

TECHNICAL SPECIFICATIONS
For DFC15 Controller:
Controller Power Requirement: 12VDC
Power Adapter: Input: 100-240VAC; Output: 12VDC, max 2A 
Adapter lead length: 1m 
Measuring Accuracy: ±1% 
Output for Solenoid valve: 12VDC, max 5A 
Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8
Max Total Volume : 999999 G/L 
Quantitative Range: 0-9999.99 G/L
Flow Rate Range: 0-9999.99/LPM(GPM) 
Cable Length : 1m 
Dimensions: 88mmx126mmx30mm 
Weight: 200g 
Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: <85% 

For G2"Flow Sensor:
Flow range:10-200L/min
Allow compression:Water pressure 1.75 Mpa below
Sensor:Hall effect
Cable length:480mm
Max Size:92mm*68mm

Note:
1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.
2, Ensure the solenoid valve and flow sensor direction is the same with water flow.
3, Please use teflon on the thread when requirement, ensure don't leak.
4, The wires can be extended up to 10m.
5, Avoid the water into the controller.

Package includes:
1 x DFC15 controller
1 x G2" flow sensor
1 x Power adapter
1 x Temperature sensor
1 x Manual

We Also Recommend


Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)