DIGITEN WTC200 Wireless Temperature Controller Programmable Thermostat Outlet Remote Control with 2m/6ft NTC Temp Sensor Probe Heating Cooling Mode for Fan Heater Greenhouse Homebrewing Reptile(UK Plug)
- 📡【Wireless Remotely Control】: Remotely set and control, portable design, which is more convenient and handy. Communication range is 50-100m in open area. It can save all settings even if the power failure.
- 🕹️【Easy to Use And Program】: Accurate reading temperature for LCD display with back light. Freely switch between ℃ and ℉.
- 💰【Save Money】: The thermostat will make your life not only comfortable but energy efficient. The thermostat turns on and off appliances connected to outlet based on the target temperature, thus saving money on your electric bill while maintaining comfort.
- 💯【High Accuracy And Safe】: Come with a highly accurate temperature sensor, ambient temperature is detected automatically by the sensor on the receiver socket. High and low temperature alarms are available, the maximum load can reach 15A, 3300W.
- 🎈【Widely Used】: Widely used for greenhouse,mushroom house, reptiles breeding, pet feeding, wine cellar, cigar storage, home brewing, seed germination, fermentation, baby room, attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, etc.
The DIGITEN wireless thermostat is intended for automatic control of electrical heating appliances or cooling appliances, it will automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving.
The difference between WTC100 and WTC200:
WTC100: Temperature probe is built into the remote control(transmitter).
WTC200: Receiver(thermostat outlet)with 2m/6ft NTC probe
Operating voltage: 100-240V AC
Load capacity: 100-240VAC 15A, 1650@110VAC, 3300W@220VAC
Remote batteries required: 2PCS 1.5V AAA, standby for 6 months
Transmission distance: 100m (open space)
Measuring temperature range: -10℃~80℃, 14℉~176℉
Activation temperature range: 0℃~70℃, 32℉~158℉
Temperature accuracy: ±0.1℃/℉
Control Precision: ±1℃/℉
High and low temperature alarm: 0℃~80℃/32℉~176℉
Remote control refresh frequency: 20 Seconds
Temperature probe: Receiver(thermostat outlet) with 2m/6ft NTC probe
Cooling mode and Heating mode conversion:
Set the temperature RUN value higher than the STOP value(RUN >STOP), the controller is in cooling mode.
Set the temperature RUN value lower than the STOP value(RUN <STOP), the controller is in heating mode.
Outlet and Temperature Sensor:
2m/6ft waterproof probe is plugged in the receiver.
Temperature is detected by the receiver, place the probe where the temperature needs to be detected.
Can be monitored and contorlled in different rooms with 50-100m.
The Low alarm and High alarm are not equal to the Run temperature and Stop temperature.
The High alarm and Low alarm are turned off by default.
To turn on the alarms, long press and hold the SET button, then press the DOWN/UP button to set the High/Low alarm velue you desire on the High/Low page.
1, 2 AAA size batteries are needed for the remote. The package will not include batteries.
2, Multiple sets of equipment will not interfere with each other. if you want one remote to work only one outlet, when pairing, please remove the batteries of other remotes and keep only one remote control is in active (power on) state.
1x Remote Controller
1x 2m/6ft NTC probe
1x User Manual
We Also Recommend
DIGITEN WTC100 Wireless Thermostat Plug-in Temperature Controller Outlet Remote Control Built in Temp Sensor Thermometer Heating Cooling Mode for Fan Heater Greenhouse Home Brew Reptile
DIGITEN WTC200 Wireless Temperature Controller Thermostat Outlet Remote Control Thermometer with 2m/6ft NTC Temp Sensor Probe Heating Cooling Mode for Fan Heater Greenhouse Homebrewing Reptile
DIGITEN WTC100 Wireless Thermostat (with 2 Receivers) Plug-in Temperature Controller Outlet Programmable Remote Control Thermometer Heating Cooling Mode for Fan Heater Greenhouse Home Brew Reptile
DIGITEN WTC100 Wireless Programmable Thermostat Plug-in Temperature Controller Outlet Remote Control Built in Temp Sensor Thermometer Heating Cooling Mode for Fan Heater Greenhouse Home Brew Reptile(UK Plug)
Purchased this for a grow room to run two 80w tube heaters. Very easy to set up and use. Best temp control I’ve used!
Used in out static for out oil filler rad.
We run a Woodburner and have an oil rad as a backup. Before we were using the thermostat on the rad to control it. This only controlled the temperature of the oil.
Now we leave the controller in out daughters room and if the Woodburner finishes for the night it'll bring the oil rad on and keep they toasty.
Tech support responded to my question promptly. Using this to control an oil filled radiator to keep a room at the right temp for a very spoiled Canary!!
Simple to use.
Great little temperature controller for my greenhouse. Can see the temp and control greenhouse heater from inside my house. Also has a good range of temp start and stop set points.