DIGITEN Wireless Thermostat Temperature Controller Outlet Remote Control Built in Temp Sensor
★【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). One remote can control multiple receiver switches(only WTC100). It can save all settings even if the power failure.
★【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc.
★ 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving. Free to switch between ℃/℉.
★【ON/OFF manual button on the transmitter】: Manually turn on/off the receiver remotely. LCD with backlight display reading accurately. Portable design, handheld/wall mounted.
★【High Accuracy】: Built-in highly accurate temperature sensor, ambient temperature is detected automatically by remote controller, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W
The DIGITEN wireless thermostat is intended for automatic control of electrical heating appliances or cooling appliances, it will automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving.
The difference between WTC100 and WTC200:
WTC100: Temperature probe is built into the remote control(transmitter).
WTC200: Receiver with 2m/6ft NTC probe
Operating voltage: 100-240V AC
Load capacity: 100-240VAC 14A, 1500@110VAC, 3000W@220VAC
Remote batteries required: 2PCS 1.5V AAA, standby for 6 months
Transmission distance: 100m (open space)
Measuring temperature range: -10℃~80℃, 14℉~176℉
Activation temperature range: 0℃~70℃, 32℉~158℉
Temperature accuracy: ±0.1℃/℉
Control Precision: ±1℃/℉
High and low temperature alarm: 0℃~80℃/32℉~176℉
Remote control refresh frequency: 20 Seconds
Temperature probe: Built in remote
Cooling mode and Heating mode conversion:
Set the temperature RUN value higher than the STOP value(RUN >STOP), the controller is in cooling mode.
Set the temperature RUN value lower than the STOP value(RUN <STOP), the controller is in heating mode.
1, 2 AAA size batteries are needed for the remote. The package will not include batteries.
2, Multiple sets of equipment will not interfere with each other.
1x Remote Controller
1x User Manual
We Also Recommend
DIGITEN LCD Digital Thermostat Simple Stage Pre-Wired Temperature Controller
DIGITEN Wireless Temperature Controller Thermostat Outlet Remote Control with 2m/6ft NTC Temp Sensor
Instructions for silencing alarm are a bit confusing, aside from that it works great.
I haven't received it yet. Do you have the tracking number?
Still have not received.
Thank you for your quick response to set Alarm setting, (Please set high alarm to highest value, and set low alarm to lowest value)
I use this unit to turn on and off a fan to blow air from downstairs where the wood pellet stove is, to the up stairs through a duct. The fan I installed was manual with a remote wifi switch at the plugin to turn it on and off, But now with the Digiten switch set in the cooling mode it is automated!
When downstairs room temperature rises to 23c the fan turns on and blows air to the upstairs and when the pellets stove shuts off and the temperature drops to 20c the Digiten switch shuts the fan off. Works Great!!!
This was easy to connect and setup. Turn fan on when too hot and turn off a low temp set point. My question is, how do I permanently turn off the warning alarm beep. I don’t want to got to the other room and turn it off ten times or more a day/night?